Creator of SETT. Adventurer.
Tynan
1
Vote

Making a Squared Flexible Projector Screen

So, one of the big things I'm going to show in my next RV update video is the home theater I built into it. Right now I have a lycra/polyester fabric that I currently use for a screen. When I pull it taut, the sides bow in, giving me a smaller rectangle than is optimal to use for projection.

I would like to edge the screen with black non-stretch webbing to create a frame. My two ideas are as follows:

1. Maybe just having the non stretch webbing will force the screen to be rectangular and not bow in.

2. Maybe I should stretch the fabric out like I have it now, and pin the webbing to it while it's stretched. Then when I sew the webbing in, maybe the fabric will be rectangular? Here's a picture to show what I mean:


Suggestions on how to do this? This is one of the last things standing between me and my next RV post.

Subscribe to Tynan

Do Something

Get new posts sent to you. If you change your mind later, unsubscribe with one click.

You're a member of this community! Use the buttons on the right to vote on ths post or share it with others. Or leave a reply below.

Vote

No bio set
Guest
Vote
Advanced options  
at
Kyle
0
Vote

par=Bar. I accidentally a word.

Kyle
1
Vote

Your best bet, From my experience in working with projector screens, is to have a metal par, or something rigid, on the top and bottom. then stretch aircraft wire (twisted strand, really stong wire) between each side, forming a rectangle that you want (with the wires being the vertical beams). Taking a smaller wire, or maybe just create a sleeve with the polyester material, attach the sides of the material every inch to the wire. this allows for a screen that is stretched tight, but can be rolled up when needed, and when hung, will maintain its shape. Just my experience working as an AV tech at Uni.

--Kyle

Creator of SETT. Adventurer.
Tynan
0
Vote

I can't really have rigid bars in it, because of where I'm stowing the screen when it's not in use. One of the vertical sides could be totally rigid, though, leaving me three sides to deal with. Do you think that aircraft wire on those three sides would be enough to keep the stretchy screen material from bowing in?

Kyle
0
Vote

That really depends on the strength of the wire. the heavier wire would be better, but then you have a unwieldy heavy contraption that will probably have spent a fortune on. hmm...I guess another way to do it is to have collapsible camping style tent rods for the four sides, and then just make the polyester have sleeves on all four sides. That way you can put the tent poles through when you use it, and then collapse the entire thing down when you don't need it. For each corner, just have a small block of wood that has holes on 2 of the six sides that you can insert the ends of the poles into. So, to sum this contraption up:
 - get 2 sets of collapsible tent poles. Cut them so that they can still collapse, but are much shorter. A hacksaw to cut the titanium, and then re-tie the ends of the elastic inner around a washer so they still collapse properly.
 - Sew the four sides of the polyester into sleeves, so the tent poles can slide through the edges. By hand is cheaper, but a sewing machine would get it done in minutes instead of hours.
 - get 4 small pieces of wood to act as corners. Get a drill and bit that is slightly bigger than the tent pole ends, and drill two adjacent sides half way through the wood. this will hold the four corners of the screen. 
 - slip the fabric over the tent poles, attach the four corners of wood, and the fabric alone should hold it pretty well. You can always have two more tent poles to act as diagonal braces, but this is overkill. personally, I love Overkill, but that is just me. 
This should work pretty well, and last for a good while. the weakest part is the stitches, but a double stitch pattern would hold for years. Plus, its frugal, which Is awesome, and relatively minimalist, which always looks neat (I am a minimalist, so the less parts the better).

--Kyle
PS - if you ever stop by reno, Shoot me an email. It would be good to meet the guy who is convincing me to live in an RV (which sounds AWESOME, by the way)

Steve
2
Vote

Why does it have to stretch?  If you're just trying to make a smooth(ish) dispaly surface it doesn't need to be stretched tight causing your bowing issue.  Just pulled tight enough to make it flat.

I went to Alaska the summer of 2010 to take pictures of ice climbers and live in my van. I'm going back in 2012, this time riding my motorcycle from Washington, DC.
badandy
1
Vote

Here's a possibility: stretch the fabric over a rectangular wooden frame the size and shape you want the screen, and secure it with staples. While the material is square in the frame, somehow attach the webbing to the sides, then ditch the frame. Maybe this will make the whole thing stay square.

Kyle
0
Vote

Sadly, the poly fabric pulls from the tightest density, meaning the center. As long as the sides are flexible, they will bend in, so webbing is essentially out. It has to be something rigid, but something collapsible as well.

Ronald Pottol
0
Vote

I wonder about a kevlar backing? Kevlar doesn't stretch (much), so perhaps that would work? Still, you would need to get it mounted on the kevlar fabric.

'95 Rialta-dweller, VFR800-rider, builder of cool things
John Wes
0
Vote

I don't see how it's possible without rigid bars of sort... how about collapsible fiberglass tent sticks?  Hem the ends of your fabric to where the sticks will fit through the entirety of each edge (make sense?) and craft some corner braces from whatever material you like (wood, aluminum, lexan, etc.).  If you can't locate anything like tent sticks, surely you can find room for some longer rods somewhere in the RV, even on the roof under your PV or under the chassis.  You can cut a hole near the breaker panel is and slip them underneath the three drawers beside the bed or even under the matress?  By that point, you could probably find a place to stow a real retractable screen (if you can't permanently affix it to the ceiling anywhere).  Where are you wanting to position it?  What projector are you using?

I'm a surfing and motorcycle loving archaeologist who found this blog because I as well live in an rv!
ILIA
1
Vote

What about replacement poles for a tent.  They're lightweight, break down and can be cut as needed.  As for the fabric, I'm sure you know someone with a sewing machine. 

Scylla
1
Vote

I'm on an iPhone so can't be lengthy.  What you are trying to make is, from a design standpoint, a kite.

Google "rectangular kite designs" and you will see many possibilities.  Maybe one will work for you.

Susun
0
Vote

I think for any chance of it working you would need to stretch the screen out to a the rectangle and then sew the webbing on... maybe the wooden frame would be worth a try. Then when you remove the frame it may work... I like the idea Kyle talked about with something rigid on the top and bottom then you could at least roll it up.

i'm just some guy who lives in nowhere florida who likes to study and create art. nuff'said. oh and if you speak another language hit me up, odd's are i'm learning it and i'd love someone to practice with.
Lucas
0
Vote

do you think hanging clamps/clothespins from small magnets from the ceiling to support the top of the screen would work?

hide

Read Next

New Site: Best in the Land

I'm unemployed for only three days and I've already made a new site. This is one that I've been thinking about doing for a while, but just finally got around to it. If you were a member of my forums, you would have already seen it, along with a couple other new projects I'm working on.

Anyway, if I were to sit down and think of my strengths and interests, I would come up with the impossible talent of being one of the greatest consumers on earth. For any given product category, from down comforters to toasters, I could tell you what the absolute best item is. In an effort to turn this seemingly useless gift into something, allow me to present Best in the Land.com.

Several times a week (perhaps even once a day), I'll write about a product that I know has no equal. Occasionally I'll write about something too expensive for normal people to buy, but most of the time I'll focus on practical purchases. Most of the products I'm planning on writing about I actually own. Those that I don't own I have used extensively.

Maui Jim Titanium Sport Sunglasses

I usually buy ridiculously gaudy sunglasses with rhinestones in them. However, when getting ready for the 2008 trip around the world I knew I'd need something a little more practical.

After extensive research, I picked the Maui Jim Titanium Sports.

I was initially heavily biased against these glasses because I think the name "Maui Jim" sounds like something only tourists with Polaroid cameras would wear.

No bio set
Guest
Vote
Advanced options  
at
Close